Following are the main features of the product :-

• Measures CHARACTERISTIC IMPEDANCE OF CO-AXIAL OF RANGE 50 OHMS TO 100 OHMS successfully.
• Wide Sinusoidal Frequency Range of measurement starting from 1MHz to 100MHz in steps of 1MHz at which Characteristic Impedance is computed. 
• HAND HELD DEVICE for Field Instrumentation with a BATTERY BACKUP of more than 200 minutes.
• DETECTS AND REPORTS FAULTY CABLE in case Cable is SHORT, OPEN or DISCONNECTED2. ⦁ Cable Length for measurement tested range from 45m to 150m.
• Computation Accuracy ranges within ±10% of the actual impedance of the cable (Tested for 50Ω and 75Ω cables).
• 32X160 Graphic LCD for the display of computed Characteristic Impedance, Frequency and Characteristic Impedance (Ω) v/s Frequency (MHz) graph and other important parameters. Display is used for important status messages for uSD Card, USB, Meter Configuration and etc. Display also indicates Battery Voltage Level.
• 2GB uSD Card Storage capacity for storing the computed Characteristic Impedance along with the measurement signal frequency. Maximum storage capacity of the meter is tested upto 2GB.
• USB-OTG (On the Go) Interface for transfer of the uSD Card storage data to a PC as a Pen-Drive. ⦁ Exclusive PC based spread sheet display of experimental data.
• 7.4 Volt (3.7V x 2Cells), 1700mA Li-ION Rechargeable Battery Back Up of 3 hours of full instrument operation. The battery can with stand a temperature of 0 to 45°C during charge and -20 to +60° C during discharge3.
• Tough ABS Enclosure3, with Flame Retardant UL94 V0 Material3 with Brass Inserts4 in the Corner Posts
• Industrial grade components for field usage, PCB temperature grade 0 to 125 degree C.
• Detailed Manuals Available.